|
Many terminals are
finding that the new record keeping requirements, together with
computer and environmental problems, reduces the time available for
extensive coupler repairs. This is where PPM can help. We are now
rebuilding Emco Wheaton J451 and OPW 1004/D/D2 couplers using the
knowledge gained over 20 years of working with terminals.
 By sending your
old couplers to PPM you can be assured of the following service:
-
 Disassembly
down to the locking lugs and their roll pins.
- Inspection of
all parts for excessive or unusual wear.
- An estimate
of repair costs if higher than average ($139.00).
- Replacement
of shaft seals, bearings and other worn parts.
- Replacement
of product seals as required.
- Elimination
of any "leak-while-loading" of OPW couplers.
- Re-assembly
and leak testing.
We guarantee that we
can rebuild almost any coupler into a leak free unit and invite you
to try our exclusive service. Please ship your couplers for
rebuilding to:
PPM div. ALLESCO
14375 Sommermeyer
Houston, Texas 77041
If you cannot wait the
normal 7 day (or less) turn-around, we normally have rebuilt couplers
available for immediate shipment from $239 each. Please
contact us for details.
For first time
customers, we will rebuild one Emco Wheaton J451 or OPW 1004 for only
$99! |
